reComputer RK Module FAQ

Last updated:

Before you begin

  • Confirm the exact product variant and the SoC it is based on (RK3588 or RK3576).
  • Check the current firmware version before applying version-specific steps.
  • Answers on this page were last verified on 2026-11-01; re-check the linked official sources if you are reading this later.

Documentation & Usage

Are the mechanical drawing, the B2B pin definition and the KiCad footprint available for the reComputer RK3576 Module?

Applies to: reComputer RK3576 Module and its dev kit, for carrier-board and footprint design

Last verified: 2026-11-01

Not at the moment. The only open resource currently published for the reComputer RK3576 Module is the schematic on Bazaar: https://files.seeedstudio.com/wiki/reComputer_RK/Documents/recomputer_rk3576_module/reComputer_RK3576_Module_v1.0_260821_sch.pdf .

Notes:

  • If you need a customized version of the device, please contact the Seeed team about the customization service

References:

Still need help?