reComputer Industrial RK FAQ
Last updated:
Before you begin
- Confirm the exact product variant and the SoC it is based on (RK3588 or RK3576).
- Check the current firmware version before applying version-specific steps.
- Answers on this page were last verified on 2026-11-01; re-check the linked official sources if you are reading this later.
OS & Firmware
How do I debug a newly delivered board?
Applies to: reComputer RK3576 boards
Last verified: 2026-11-01
The firmware and the image are already on the device when it ships. Once the device arrives, power it up as described and complete the initial configuration; it is then ready to use and to start developing, which takes roughly 10 to 20 minutes from the moment you receive the device.
References:
Hardware & Interfaces
Does the reComputer RK3576 Industrial support a UPS and a TPM module?
Applies to: reComputer RK3576 Industrial; the exact scope is confirmed together with the answer.
Last verified: 2026-11-01
The device supports a UPS module, and that module is about to go on sale. For the TPM module, the RK3576 has a built-in hardware security mechanism, so no TPM module has to be added.
- Secure boot: the chip carries a BootROM code in ROM; at boot it verifies the digital signatures of the subsequent loaders step by step. The hash of the public key can be programmed into the one-time OTP memory or the eFuse of the chip for verification. Rockchip also provides tools such as rksecure to manage the secure boot state.
- ARM TrustZone: the RK3576 supports ARM TrustZone, which splits the CPU and memory resources into a Secure World and a Normal World
- The RK3576 integrates a dedicated hardware crypto module (Crypto IP) that supports the standard algorithms AES, DES/3DES, RSA, ECC and SHA
References:
Still need help?
- Re-check the related tutorials in the reComputer AI Lab tutorials.
- Open a discussion in the Seeed Studio forum.
- Contact Seeed technical support with your product model, SKU, image version and host system.